Published at Thursday, 30 August 2018. Air Compressor. By Trudy Mcdaniel.
Years later, I built a smaller woodworking shop in my home which only required one air sander running at a time. For that shop, I purchased an air compressor half the size and isolated it in a soundproof room in one section of the shop. I ran galvanized pipe under the shop floor to three regulators at three different connection locations. The machine I purchased for that shop as a 5 HP Ingersoll Rand model with an 80 gallon tank. At the 80 PSI required by my Dynabrade sander, the compressor would produce enough air from morning to night. I must say that that compressor was very well built. All I had to do was keep an eye on the oil level in the sight glass. At night, I would turn off the master air valve on the side of the air compressor, leaving the electricity on, to silence the compressor until the next work day.
I found a nice air powered air gun at a local hardware store. At first it seemed just perfect. I was about to buy it when I noticed on the little description card that it was not recommended to be used with a compressor smaller than 6 gallons. Dang! The portable air compressor I had was only a small 2 gallon pancake compressor. That just wouldn't cut it. I had to buy a larger unit so that I could get the gun, so that I could finish the house project. See how this goes.
This kind is suitable for people on the go or who travel. You never have to go through the tedious task of having to find a vehicle big enough to carry your compressor wherever you wanted to go.
Any content, trademark’s, or other material that might be found on the inourownbackyard.us website that is not inourownbackyard.us’s property remains the copyright of its respective owner/s. In no way does inourownbackyard.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 inourownbackyard.us. All Rights Reserved.